How to perform a male haircut machine

Send

The stores offer a huge range of equipment for haircuts, which are designed to perform a variety of hairstyles on their own at home. To cut a man with a machine you need to follow some of the rules of high-quality hair techniques.

Stylish and new hairstyle allows you to change the image and improves mood. Using a machine is considered the best and economical option to create a neat haircut for short hair.

Features of the implementation of the hairstyle machine for beginners

A simple technique for male haircuts is as follows. All strands of haircut with one particular nozzle. A section of the neck and temporal parts are processed without additional attachments. At the same time the device is turned towards hair.

The technology of more complex hairstyles is made as follows:

Set the nozzle number 1 or number 2. The device is held with a blade up. Treatment begins with the neck, with the hairline. Curls clipped to the occipital region.
Then the nozzle is changed to number 3 or 4 and the curls are trimmed to the top. Then the nozzles are replaced again and the strands on the temples are cut off. Then the nozzle 4 or 3 is fixed again and the strands are sheared from the temples to the crown area.

The device is conducted to the crown. You can not cut along the growth of curls, since this strands are obtained in different sizes.
The process is applied comb, and curls are removed over it.

Haircut machine always starts from the back of the head. At the end of the procedure strands on the temples and neck are trimmed.

Tips and tricks for using hair clippers

Before you cut the hair with a machine, you need to moisten them and carefully comb. Strands are divided into several zones. At the same time there are partings from the depressions on the forehead to the occipital part. This separates the temples and the parietal region.

The following zones are obtained:

parietal,
two in the temporal areas
three in the back of the head.

What matters is the high-quality edging on the neck. It is a trapezoidal or rounded shape.

To make a male haircut machine at home does not require professional skills. Self-styling not only saves money, but also allows you to perform stylish and neat hairstyles.

Schema hairstyles, helps to do the job correctly. But it takes into account the shape of the head and facial features.

A simple option is considered a model for zero. This hairstyle is suitable in the presence of a standard head shape.

Hairstyles of sports type: boxing or half-boxes are longer and more difficult to cut, but they can be performed with certain skills.

With the help of a special device such short haircuts as a hedgehog are performed. It has a rounded shape and is suitable for hard strands.

With the help of a typewriter box is performed. It fits almost all men, except for too elongated faces.

In the traditional version, the occipital part is trimmed with a device with a small nozzle.

Long strands may begin closer to the crown or much lower. Hairstyle is performed with bangs or without it. This option is not suitable for curly curls. You can not shave your head under zero when the neck is uneven.

How to cut under the machine with the transition?

To model a haircut turned out smooth, you need to make the right transitions. In this process, the processing device must be neat and quality. The comb must be held in your left hand.

Strands are cut with stripes. First, the forehead area is trimmed, then the back of the head. A smaller cap is used for the neck.

Cutting is performed from the bottom, and the device is up. First, the machine is pressed against the surface of the head, and the apparatus detaches from the crown. This aligns the difference between the strands. Then the same nozzle cut his temples.

From the parietal region, you need to perform a smooth transition. From short strands near the edging. Edging is performed at the neck and behind the ears without a nozzle. Then check the length of the strands over the entire head.

All the flaws in the haircut are corrected by thinning scissors.

How to cut whiskey?

An important stage is the edging of the temporal region. Whiskey can be oblique, rectangular, to the ear lobe or middle of the ear.

Start laying with the temporal areas. In this case, the curl is separated by a diagonal parting. Then the hair is combed over the face, and the corner of the temple is clipped. Then the strands are combed down and the fringing of the temporal part is performed.

Instrument movements should be light and effortless.

Choosing a clipper

For home use, it is better to purchase a vibration (if your budget is limited) or a rotary typewriter. The vibration device has a number of drawbacks (noise, weak power, etc.), the main one of which is that it turns off after 20 minutes of continuous cutting.

More reliable and convenient rotary machine with two speeds. Low speed will allow you to arrange difficult areas. This machine is suitable for hair of varying degrees of thickness and stiffness, with its help with a certain skill you can perform almost all men's model haircuts - from classic to youth.

Information for home hairdresser

Before you get started, it is worth getting acquainted with some theoretical issues. Here, for example, is the division of the head into such zones as:

parietal,
two temporal lateral,
upper occipital,
lower occipital.

When cutting each of these areas, the direction of hair growth should be considered.

Before cutting the hair should be washed, dried and carefully combed. If you have never done men's haircuts for a typewriter at home, follow these guidelines (and do not forget to watch the video posted after the article).

Hair must be cut against their growth.
Start any male haircut from the back of the head.
Move the machine smoothly, without sudden movements.
For processing individual strands, use a comb with frequent teeth.
After completing the haircut, do not forget about the edging, which makes the other side of the machine without a nozzle.

The best models for haircut machine

For a layman who is just starting out using a typewriter, men's haircuts with no length transitions are ideal.

To perform the simplest model, select a nozzle (preference is better to give the largest, so that later there is an opportunity to correct the flaws) and process in turn all the above areas - from the back of the head to the temporal-lateral and parietal areas.

Easy cut with length transition

Many model men's haircuts differ smooth or deliberately sharp transitions of hair length. If you have not dealt with the machine before, start with the option with a smooth transition. At the same time observe the following rules.

With the help of a 9 mm nozzle, the occipital zone is processed (towards the temples first, then to the crown). We must strive to cover as much as possible in one movement.
The hair on the crown zone is removed with an 11 or 12 mm nozzle, without tight pressure on the head.
Edging make one of the smaller nozzles.

The common short men's haircut boxing belongs to the category of universal (it can be called youth, and at the same time it is worn by men of solid age), so you should learn how to perform it at home. You will need tips of 1.5 and 3 mm.

The hair on the crown zone is cut using the “fingers” method.
Occipital and temporal lateral areas are removed to the desired height.
To reduce the length of the transition was less pronounced, the haircut is adjusted with scissors.

For such a male model as a box, use a 4-mm nozzle.

The difference of this haircut from the previous one is that the transition length must be smooth. In addition, the hedgehog looks perfect only on thick and hard hair. Perform this male haircut as follows.

The hair on the top of the head is cut “on the fingers”, keeping the length up to 4 cm.
With the help of a wax and a hair dryer, the hair on the treated crown region is laid so that they stand straight.
Temporal-lateral zones and the back of the head are treated with a machine with bands that are on top of each other.
In the neck, the hair should smoothly disappear.

One can learn how to operate a clipper not only to save time and money, but also to learn the subtleties of hairdressing from the inside. Then in any salon you can distinguish a master of the average from a true professional.

Choosing a typewriter

For home use, you can buy an "amateur" machine from the middle price category. It is necessary to pay attention to the following points:

Motor cars. If it is rotary, the device will not vibrate, which greatly simplifies the work.
Nutrition. It can be from the network or battery. Non-professional machines are distinguished by the fact that when the battery is low, they “chew” their hair and do not shear, but pull it out. A professional just turn off.
Nozzles The more nozzles, the greater the range of lengths haircuts, which will make the work neater and more accurate.
Blade coating material. Blades can be coated with a nickel-chromium alloy, titanium or ceramics. The last two provide durability of the device, while they are hypoallergenic, and nickel can cause allergies in some people.
Sharpening blades. They need to be sharpened periodically. It is difficult to do it yourself, but it is expensive to carry the tool somewhere, so it’s better to buy a machine with self-sharpening knives.
The shape of the cutting elements. Oddly enough, but it is of great importance. The most convenient are the W and X forms, because they capture the hair better and lift it. This parameter should not be visually determined - it is always displayed in the model name. For example, in the X-Master typesetter blades with X-shaped teeth are installed.

What tools are needed

In addition to the clippers, you need to purchase the following tools:

FEATURES OF IMPLEMENTATION HAPPIES WITH A MACHINE FOR BEGINNERS

The technology of more complex hairstyles is made as follows:

Set the nozzle number 1 or number 2. The device is held with a blade up. Treatment begins with the neck, with the hairline. Curls clipped to the occipital region.
Then the nozzle is changed to number 3 or 4 and the curls are trimmed to the top. Then the nozzles are replaced again and the strands on the temples are cut off. Then the nozzle 4 or 3 is fixed again and the strands are sheared from the temples to the crown area.

The device is conducted to the crown. You can not cut along the growth of curls, since this strands are obtained in different sizes.
The process is applied comb, and curls are removed over it.

Haircut machine always starts from the back of the head. At the end of the procedure strands on the temples and neck are trimmed.

TIPS AND RECOMMENDATIONS WHEN USING A HAIR MACHINE

The following zones are obtained:

parietal,
two in the temporal areas
three in the back of the head.

What matters is the high-quality edging on the neck. It is a trapezoidal or rounded shape.

To make a male haircut machine at home does not require professional skills. Self-styling not only saves money, but also allows you to perform stylish and neat hairstyles.

Schema hairstyles, helps to do the job correctly. But it takes into account the shape of the head and facial features.

A simple option is a model for zero. This hairstyle is suitable in the presence of a standard head shape.

Hairstyles of sports type: boxing or half-boxes are longer and more difficult to cut, but they can be performed with certain skills.

With the help of a special device such short haircuts as a hedgehog are performed. It has a rounded shape and is suitable for hard strands.

With the help of a typewriter box is performed. It fits almost all men, except for too elongated faces.

In the traditional version, the occipital part is trimmed with a device with a small nozzle.

HOW A STREAM UNDER A MACHINE WITH TRANSITION?

To model a haircut turned out smooth, you need to make the right transitions. In this process, the processing device must be neat and quality. The comb must be held in your left hand.

Strands are cut with stripes. First, the forehead area is trimmed, then the back of the head. A smaller cap is used for the neck.

All the flaws in the haircut are corrected by thinning scissors.

HOW TO STARCH WHISKEY?

An important stage is the edging of the temporal region. Whiskey can be oblique, rectangular, to the ear lobe or middle of the ear.

Instrument movements should be light and effortless.

HOW IS THE RIGHT TO STRETCH A HOUSE MAN?

Men's haircuts under the machine with bangs are complex. For haircuts bangs selected the largest nozzle. In this case, the bangs are trimmed with a comb, which lifts the strands to the desired distance. The cut device is done on top of a comb. It turns out smooth from the first time.

Understand the simplest rules of cutting machine and go

With the help of the machine, you can perform a short haircut or create a complex hairstyle.

Fashionable haircut without leaving home

Not all men love to visit a beauty salon. But this does not mean that the appearance should not be monitored. Some procedures can be successfully carried out at home. For example, you can charge yourself to cut your household. To do this, they should familiarize themselves with the basics of technology, which is quite accessible even to a person who is far from hairdressing.

Rules haircut at home

Haircut for men at home does not require supermasters. Before starting, take care to prepare all the necessary tools. You will need a clipper, high-quality sharpened scissors, several combs with different teeth, a cape on the shoulders, clips and a spray gun.

A homebrew hairdresser must follow a few simple rules:

The haircut is carried out from the occipital zone, gradually moving from the bottom up and from left to right.
Do not take excessively wide strands on the comb.
Having finished work on a nape, accurately issue a lower contour.
Go to the whiskey, moving to the top.
Do not rush to strongly cut the bangs, otherwise you will not be able to comb it.
Before the end of the haircut once again, go over the entire head.
Shave your neck if necessary.

Selection of hair at home

Men's haircut is one of the main indicators of the image, so you need to choose it very carefully, taking into account several criteria:

Face shape. Facial features are very important. It can be oval, round, square or triangular. Oval and triangular shapes allow you to cut a man creatively and without restrictions, creating deliberate disheveled (boxing, iroquois, asymmetrical variants). A square face requires a haircut that can soften rough features and visually stretch a face (hedgehog, classic hairstyles of the 50s). A round-faced man needs to be trimmed so as to create the illusion of a lean face (British, Canadian, Quiff).
Hair structure No less important circumstance is the texture of your hair. The same haircut falls differently on different types of hair. Also, the presence or absence of curls can play a role.
The complexity of hair. A man who does not like to waste time is unlikely to be satisfied with an exquisite haircut that requires hourly styling. It is worth thinking about it, considering the options.

How to cut with scissors at home

Before you begin, read the basic rules of house cutting.

Dampen hair with a spray bottle.
Divide the strands into the temporal, occipital and parietal zones.
Since the haircut should start from the back of the head, fasten the remaining hair with clips.
Separate the strand (about 1 cm) and comb it.
Pinch the curl with your middle and index finger.
Cut it at a centimeter above your fingers.
Take the next strand (cut off do not let go) and comb them together.
Cut along the first line.
Secure the treated hair with a clip, leaving a thin strand to control the desired length.
Carefully process the contours with edging or shading.

The most popular are round, oval and trapezoidal edging. When choosing a bang, rely on your taste: it can be oblique, straight or asymmetric. The shading is also done with a comb and scissors: cut the hairs that protrude over the hairbrush when held on the head of hair. Repeat the process in the opposite direction.

How to cut a machine

You can perform a variety of male hairstyles at home using a hair clipper. The process will not cause any difficulties to anyone, since the device is very convenient in operation. You can easily control the length of the hair, simply changing the nozzle.

For beginners, it is better to make short haircuts, which will reduce the likelihood of errors.

The technology of cutting the machine at home is extremely simple and consists of the following:

Tightly attach the selected attachment to the head and hold from the back of the head to half the surface of the hair.
Walk along the side and front.
If necessary, adjust the residues with scissors.
Decorate the contours and whiskey.
Cut the bangs.
Shave your neck.

Doing haircuts at home will save you time and money. In addition, now you will have a personal hairdresser who can cut your hair at home as well as salon masters.

And if you are interested in a boy’s boy’s haircut at home, go here .

How to cut a man at home with a typewriter or scissors: the tricks of a good housewife!

In contrast to women, who for the most part meticulously trust their locks exclusively to hairdressers, a huge number of representatives of the male part of the population simply do not have this problem.

Considering that most men in their hairstyles are extremely unpretentious (it would be short and neat), and queues in beauty salons are perceived as a personal insult, almost every woman who has a man in the face from boy to husband, sooner or later faced a problem how to cut a man at home. In fact, men are right in their request. It seems difficult at first glance.

If desired, accuracy and knowledge of some simple subtleties of craftsmanship, male haircut at home will be on the shoulder of every woman, especially if done with the help of a typewriter. Those who decide to master the art of seeing a man with a typewriter at home need to remember a few simple rules.

First, this is what the hair before washing should be washed and dried to avoid tucking and tearing. In addition, wet hair instantly blunt the machine. Secondly, the machine works on the principle of scissors: the lower teeth are stationary, and the upper ones move like a scissors. Approaching the machine to the head, they cut off more hair, moving it away from the head - they cut off less in length, reducing it to “no”.

Washed, dried hair is carefully combed, the machine gently moves against the growth of hair, lifting them from the roots and leading from bottom to top. Begin with the occipital zone, then the temporal and end parietal. Beginners at first better to choose the largest nozzle, so as not to accidentally overturn the hair.

The longest ones will remain on the parietal area, so then the nozzle is changed to a shorter one and once again passes through the back of the head and the temples, gently short movements “aligning” the places where the length changes, so that the “sills” do not remain.

At the temples, around the ears, and especially at the back of the head, it is necessary to press the machine to the head very carefully, carefully cutting off the hairline and nullifying the hairline. Whiskey can be cut diagonally or straight, if desired. When a certain practice is achieved, it will be possible not to change the nozzles, but to regulate the length of the hair with the distance and approach of the hand with the machine to the head. The main thing is not to leave sharp boundaries and act very smoothly, the machine will do the rest. Cutting with scissors requires a little more skill and manual dexterity.

Those who want to practice how to cut a man with scissors at home should choose a comb, depending on the hair color: it should be dark when cutting blond hair and vice versa, this contrast will help in the beginning to orient yourself in the length of hair on the comb and not cut off the excess. The first approach is performed using thinning shears that leave no sharp boundaries.

Starting the same way from the occipital, going to the temporal and parietal zones. To do this, pry the comb the hair roots, pushing them away from the head, and cut with scissors at the length we need. At the temples to clean more, if desired, quite a lot, just the same at the back of the head, many men like the short trimmed back of the head, it’s necessary to proceed solely from the wishes.

Then with the help of scissors and perform "blurring" the boundaries. Comb pry under the roots, to lead smoothly, and scissors to cut finely, quickly and often. Compare the transition from the middle of the head and going to the temples. The hairline on the back of the head should be leveled to zero at first with scissors, and then clean with a safety razor.

Knowing these simple rules of how to mow a man at home, you can eventually acquire a stable skill and perform more complex haircuts that require hard hands and some knowledge, such as “half box”, “pad” and haircuts with shaving on certain areas that are becoming increasingly popular time and not only among young people.

In conclusion, it is worth noting that a neat, well-groomed haircut and a clean-shaven nape were always not the last attributes in the arsenal of men's charm. Having all this without leaving the apartment is good luck, not to mention convenience.

Share in social. networks:

Very few men like to go to the hairdresser, as they have neither the time nor the desire. In order to save your husband from such a need, at the same time, so that he always looks neat, you can cut it yourself without leaving home. Thus, you will become for him his own hairdresser-stylist who will take care of the image of his man. And in order for you to succeed, we will tell you how a men's haircut is made at home step by step.

Which machine is better to choose?

For home use, you'd better get a vibrating or rotary typewriter. The vibration device is a budget option, respectively - it has a number of disadvantages:

Weak power
Too noisy.
Auto shut off after 20 minutes of shearing.

Rotary machine, in turn, more reliable and easy to use. Such a device is suitable for absolutely any type of hair, and due to the presence of the function of switching speeds, you can even carry out model haircuts. By itself, the rotor machine is much more expensive.

Preparation of tools

Before you begin the process, it is very important to first prepare the work tool and the surface.

Important! The working surface of the machine must be lubricated with a special lubricant, otherwise - instead of cutting the hair, it will simply pull them out.

Next you should choose a nozzle. It directly depends on the desired hair length and haircut model: the longer the nozzle, the longer the hair will remain.

Important! Pay attention to the fact that the machine is not designed to work with long hair, so first you need to cut them with scissors.

Basics every home hairdresser should know

Before you start to make men's haircuts at home, it is very important to get acquainted with the basics of hairdressing. Let's start with dividing the head. It is divided into the following zones:

Parietal,
Temporal lateral,
Upper occipital,
Lower occipital.

Important! When cutting each of these areas, be sure to consider the direction of hair growth.

In addition, before starting the process, it is necessary to rinse and dry the hair well.

If you are doing a male haircut for the first time at home, you need to follow the following pattern:

Divide the head into four zones: occipital, parietal and two from the side of the temples.
Take the longest nozzle and cut the hair from the back of the head. To do this should be smooth movements in the direction against the growth of hair.
Treat the temporal and parietal zones with the same nozzle.

Important! For the best quality during the haircut you need to constantly hold the hair with a comb. It is better to hold the comb in your left hand, and the typewriter in the right.

Replace the nozzle with a shorter one, re-treat the temporal and parietal zones. This is necessary in order to make the transitions softer and smoother. Movement should be carried out from the bottom up, with a little bit of a hand away from the head.
Handle the area of the temples and neck with a nozzle with a minimum length indicator or just a blade. This should be done very carefully, so as not to hurt.

Important! If you accidentally hurt your man during a haircut, then apply aftershave lotion on your head. It will prevent irritation and will have an antiseptic effect.

Check the finished result. Inspect the head for sticking hairs. If there are any, go again with a typewriter or cut them with scissors.
Shake the hair off the brush.

Important! After each process, a male haircut at home blade should be treated with oil.

Simple with length transition

Many men's haircuts are distinguished by smooth or abrupt length transitions. If you are a beginner in this business, then you should begin with the simplest thing - smooth transitions. In order to make this option at home, you need to adhere to the following sequence of actions:

Using a nozzle of 9 millimeters, process the occipital zone. This should be done in the direction of the temples and crown.

Important! Try in one motion to cover the largest area.

Using a nozzle 11 or 12 millimeters, remove the hair on the top of the head. The machine in this case tightly pressed to the head is not worth it.
Next is the turn of the final edging. It should be carried out using one of the smallest nozzles.

This is the most common male haircut, which is considered universal, as it is suitable for both young guys and men in age. In order to make a men's haircut at home, you will need tips of 1.5 and 3 millimeters. The sequence of actions is as follows:

Cut the area of the top of the head with a “finger” method.
Temporal - cut lateral and occipital parts to the length you need.
For a less pronounced transition, adjust the finished result with scissors.

Important! To make a box, you need to adhere to the same scheme as for boxing, only with the use of 4 millimeter tips.

This haircut is an ideal option for owners of thick and tough hair. It must be performed according to the following scheme:

On the top of the head, the hair must be cut in a “finger-like” way, while maintaining a length of 4 millimeters.
With the help of a hair dryer and a special wax, on the previously treated area, put your hair in such a way that they stand upright.
The back of the head and the temporal-side zones should be machined with stripes so that they come over each other.
In the neck area, the hair should very smoothly disappear.

How to cut a bang?

The most difficult are models with bangs. If she needs a long, then cut the bang should be scissors. You can also cut the bangs with the help of a typewriter, but for this you need to pick up the longest nozzle. In addition, it is very important to protect eyebrows before starting work. To do this, put a piece of bandage on them and seal it with a plaster. Then you can go directly to the process. Chelku lift parts, using a comb, while the hair that remains above it, you need to cut.

Important! The cut is necessary to do the machine over the comb. Thus, you will get it absolutely smooth from the first time.

The tricks of the work with the machine

In order to make the haircut process simple, and the finished result satisfied you and your man, we offer you a few small rules that will greatly help you during work:

Before starting the process, comb your hair well.
During the haircut, you need to press tightly to the head and take it only when moving from one zone to another.
Make sure that the angle of the machine was the same in each of the zones of the head.
The more movements, the better the result, so drive on the head with a typewriter until all the sticking hairs disappear.
Always make a visor for eyebrows and eyelashes, in case you want to trim the bangs with a machine.
If the head of a man in some areas is uneven, then they should be processed with a longer nozzle in order to hide these irregularities.
Try to change the nozzles, because if the whole head is cut the same, then it will look like a ball.
During the haircut, constantly compare the right and left sides, so that the result is symmetrical.

Important! Before starting work, check whether the battery is charged on the machine so that you have enough charge until the end of work.

Video footage

As you can see, mastering the skills of hairdressing is pretty easy. The most important thing is to think in advance about the style of men's haircuts that you would like to see, and, adhering to the above tips and rules, feel free to get to work.

Preparation for haircut: tools

First you need to prepare what we need in the process of cutting:

Hair clipper. A must have item for most men's haircuts.
Scissors. Here the main rule - they must be well sharpened. This can be checked as follows: if the scissors have high-quality sharpening, they will be able to cut a piece of cotton wool. And it is not necessary that they be branded, it is quite possible to do the most inexpensive.
Combs.They need a few: combs with rare and frequent teeth, as well as a comb with a "tail", which is very convenient to separate the strands.
Cape on the shoulders. Anything you can find at home will do.
Spray bottle. It is necessary for wetting the hair with water in the process of cutting.
Hairpins or hair clips. They will be needed to secure the hair in the process of cutting.

Do not forget that your work items must always be in a clean state. Therefore, after each haircut, wash them with soap and hot water.

Men's haircuts at home: step by step instructions

Men's haircut using a typewriter

Most male haircuts can be done with a hair clipper. It is simple and easy to use. Depending on the nozzle used, a certain length of trimmed hair is obtained. She also has her hair cut, because scissors won't be able to do this.

In principle, almost anyone can make primitive men's haircuts using a typewriter. You put on the nozzle and go ahead, turn your ideas into reality.

How to get a haircut machine: video lesson

It should be noted that the hair clipper is used to remove various patterns on the hair, but here you will need some experience. Well, haircut bald and many types of short haircuts can begin to do without significant knowledge in this area.

But what to do if your potential client has not very short hair or is very long at all, and does not want you to turn them into short? So the hair clipper is not suitable here. So, we use for this purpose scissors and a comb.

Men's Scissor Cut: Step by Step Algorithm

Photo: The sequence of male haircuts

We wet hair with water.

How to learn how to cut a man with scissors - video

Conditionally divide the head into zones: parietal, temporal and occipital. The latter can still be divided into three parts: the top, front and rear. Determine from which zone you will start the haircut, and pin the rest of your hair with clips or hairpins. Pre-comb your hair gently. Separate the top strand and comb it. Then grab and hold the strand with your index and middle fingers of your left hand. Cut a strand exactly 1-1.5 cm above your fingers. After that, take a comb in your right hand and, while continuing to squeeze the cut strand with your fingers, comb it together with a new, still not cut, strand, and then squeeze both strands together. A new strand is also clamped with your fingers and cut it along the line already cut. at the strand that was cut, pinch it with a clip so that it does not disturb you, but leave a thin strand so that you can control the length of the hair being cut. The approximate width of the strand captured for the haircut is 0.5-1 cm. In order for the haircut to have a finished look, it is necessary to carefully and beautifully draw its contours. For these purposes, you can perform a shading or edging.

How to make a fringing in a male haircut

Edging implies a line of hair cut along the line of their growth. Due to this, hair gets the final contours. The most popular are round, oval and trapezoidal edging. For bangs distinguish straight, oblique and asymmetrical edging.

How to make shading in a man's haircut

Shading is a smooth transition from long to short hair along the edge of their growth. You can shake hair with a comb and scissors. And if the hair length needs to be nullified, use a hair clipper. In the place where the shading will be done, the hair should already be cut to 3-5 cm.

Shading is done like this: we take scissors in the right hand, and in the left comb. Slowly move the comb, while cutting off the hair protruding above the comb. Then we repeat this process again, but in the opposite direction. If the hair is very short, shading should be done without a comb.

So we figured out how to do men's hair at home. Of course, ideally, not everything is so simple, so it would be nice if the whole process described can be visually shown to you by a person who is well versed in it. So you better learn everything and quickly begin cutting your household and acquaintances.

Haircut machine: men, women, children

A simple haircut does not cause any problems - put on some attachment of the desired length and walked all over the head. So you can cut the hair of all (men, women and children) to one length.

If you need to make a fairly short haircut (for example, 1–2 mm), and hair is much longer (more than 6 mm, for example), I would recommend using a nozzle with a longer length (for example, 3 or 4 mm), and then Walk a second time with the attachment to the desired height of the hair. My experience shows that this greatly speeds up the process and improves the quality of the haircut.

If you want to make a salon haircut (especially for women and girls), then all the curls should be divided into strands, each of which will be processed separately. For each zone is selected its own nozzle. Do not try to make a multi-level haircut with a nozzle of the same length.

Be sure to carefully comb the curls before cutting, because any "knot" can later lead to crooked hair.

Women often use a typewriter to simply trim the ends (if the hair is even). This is done as follows:

Choose a nozzle of medium length and take the most lateral strand (no matter which side), not counting the bangs - it cuts separately.
Select this curl comb. It should “stop” at the level you want to cut.
Run the machine on the bottom of the comb, without affecting the remaining hair.
Select the next strand, going from one edge to another, “hold up” the comb at the level where the finished curl ends, and cut off the extra with a typewriter.
So go to the end, then cut the irregularities with scissors using a comb.
Cut the fringe.

Women's haircut

Women's machine haircut is called pixie and has a huge number of variations that differ in the length of the hair left, their level, as well as bangs. Therefore, it is impossible to give specific names of machine haircuts regarding the type of face;

the oval shape is perfect in itself, so here you can just shave the whiskey, and leave the “middle” as it is,

Men's haircut

Men's hair is almost always trimmed with a typewriter, so each face type can be given a haircut name:

oval - “British” (or “Underkat”), “Canadian”, “Boxing”, “Poluboks” and with bangs,
round - “British”, “Canadian”, “Quiff”,
square - “Hedgehog”, “Canadian”,
triangular - "Kviff", "Canadian", "British", with asymmetric bangs,
heart shape - “Canadian”, “Anderkat”.

How to cut a typewriter

Haircut machine implies the observance of some rules, so there is a certain step by step instructions that are suitable for any haircut:

The nuances of the machine haircut at home

Machine haircut has its own nuances that must be considered so that the final result does not disappoint.

Hair balms easily remain after a machine cut. This happens most often for the following reasons:

the hair was badly combed, the nozzle was hammered, so the machine tore the strands instead of cutting them,
the curls were too wet, which made the blades dull,
the head was poorly washed. There should be neither sebum nor detergent on the hair - they dull the blades,
You tried to make a pattern. Creating it yourself is very difficult, so it is recommended to leave this part of the haircut to professionals and not to conduct experiments on yourself.

What to do after the haircut

The final step is to fix the hair and the machine after the haircut. If everything is extremely simple with hair - you need to shake off fine hairs (you can rinse your hair without using detergents) and then put your hair on, then everything is a bit more complicated with a typewriter:

Remove the nozzle from the machine and rinse it so that there is no hair left.
Use a hard brush or brush to remove any hairs from the instrument's blades.
Lubricate the blades with oil.
Clean the machine so that the dust does not fall on the blades.

Oil for processing cars often comes with the device, but you can buy it separately. I use the products of two companies: MOSER and Dewal, but there are others.

Trim the ends of your hair, cut your bangs and make some simple haircut at home with the help of a typewriter, for this you do not need to visit the salon. But something more beautiful, spectacular, which requires more thorough work, needs to be done with a specialist. After all, if you do not succeed, you will have to wait a long time until your hair grows, and all this time you will most likely be in a bad mood. It is not worth it, so do not take risks and do not experiment.

How to get your hair cut at home Cascade

Independently it is quite possible to realize an interesting and win-win version of the hairstyle - "Cascade". There are two main options for its formation.

The first version of the cascade. In order to get a haircut at home and get a spectacular cascade, you need to determine the length of the so-called cap, which will be the main beginning of the hairstyle.

You should decide on this value as precisely as possible, otherwise you will not be able to get a nice haircut at home, there is a risk that the haircut will be too short when you finish, dry and put your hair on.

After the formation of the cap, select the thin strands of hair, cutting them off alternately, as if laying on each other.

Important advice! There is a little trick. To make the resulting hairstyle look as natural as possible, twist the selected strand into the flagellum, after which arrange the scissors not diagonally, but diagonally. It is not necessary to cut the strand immediately and completely, it is better to scroll the instrument, gradually removing the measured strand.

The second version of the cascade. It is much more interesting and also requires minimal skills. Beautifully trimmed hair of medium length through its use in the home is much easier. In order to form a cascade in this way, perform the following steps:

Men's haircuts machine at home

It is advisable to use an air conditioner when pre-washing, which will make the curls smoother and more docile.

Collect the hair in a tight tail, placing it in the center of the forehead. The most convenient way to carry out such manipulations is to bend your head forward.

Holding the end of the tail in one hand, begin to gradually cut the hair to the desired length. In order not to be mistaken in the calculations, it is permissible to use a measuring tape, or a ruler. Using these tools, try to pre-measure on the loose hair exactly the length that will be needed.

You can not cut the hair on a horizontal line. It is better to do this in a chaotic manner, or to carry out a filming after the completion of the main procedure. So the hairstyle will look much more impressive and natural.

Video lesson: how to haircut "Cascade" yourself

How to trim the hair at home itself

To cut your hair at home itself, and make it beautiful, you will need two large mirrors, one of which is set straight in front of you, and the other behind. To cope without their help will be very difficult.

The easiest way is to simply trim the ends of the grown hair, or shorten the hair, giving the curls the same length. To do this, divide the strands into two equal halves horizontally.

Trim the front part looking at the large front mirror. With the hair located on the back of the head, it is better to work with the help of a mirror mounted behind the back.

Trim strands, do not rush, trying with one stroke of scissors to cut off everything that seems superfluous.

Before you cut your hair at home itself, divide the curls into small strands that need to be cut and trimmed alternately. Upon completion of the haircut, if necessary, you can trim the cut.

How to trim hair itself: video

Q: Can I cut my hair myself?

Answer Lyudmila Rubinchik:

Hair is given to us not just for beauty. There is a legend that before the fall around the head of a man there was a nimbus, and when Adam and Eve were expelled from paradise, the rays of cosmic energy surrounding their heads grew heavy and turned into hair. They became a link between man and the cosmos. Therefore, any impact on the hair changes not only our appearance.
Your own hair is BETTER DO NOT STRETCH. It is very difficult for a person to resist the deformations of his own biofield. It is better if a person of the same sex as you cuts your hair. The person who cuts you, affects your biofield. Choose an energetic cheerful master, then your life after haircut will change for the better.

Answer Dima Kuznetsov:

Answer Christina Sukasyan:

Can. but there is no guarantee that everything will be exactly

You can never and children should not cut the parent. Children can parents ...

Old people used to grill, that you cut off your happiness.

Practically in every house there are big scissors, and many girls recklessly use the inventory in the house for cutting. But in order to properly cut oneself or one's loved ones, old ones or scissors used in the household are not suitable.

It is difficult to cut off hair with dull scissors, and the ends as a result turn out to be cut, therefore such a haircut is simply meaningless.
If you are planning to cut yourself or your relatives, buy special scissors for cutting hair. At an affordable price they can be purchased at cosmetic stores (professional ones are expensive).

In extreme cases, you can use sharp scissors for cloth.

It is also a good idea to purchase thinning shears for processing the tips, but you can do without them.

How to trim the ends of the hair

Holders of long curls and hair below shoulder level often need to be adjusted to the ends of the hair. There is a certain procedure for this, which is not suitable for short strands at all.

Before you trim the hair, do not forget about the organization of the right "working" place with two mirrors located opposite each other, stools, and directly tools for cutting.

All hair should be gathered in a tight tail on the top or in the middle of the forehead. Make sure all hair is flat, no strands or “roosters” dropped out. Firmly tighten the hair with a rubber band.

Measure the length: apply a ruler to the ends of the hair and measure the point over which the scissors will soon pass. To avoid unpleasant surprises at the end of the haircut, cut 1-2 cm less than planned.

Scissors already in hand! Relax and do not worry. Separate the strand of medium thickness and make an even cut. If the scissors fail, the strand is too thick. Do not hold the scissors at an angle. The first strand will become a pattern for you. On the first strand cut the remaining hair.

Haircut is over. The finishing touch can be the final touch. This step will save you from clear boundaries between layers in our cascade. You can use the same scissors. Cut the ends of your hair with scissors held vertically. This procedure is much easier with thinning scissors. The degree of filing choose at will.

Dissolve hair and shake well (so you get rid of small hairs, and they do not fall into your eyes, by the collar). The hair is cut neatly, the multistage length is the same all over the head.

Carefully trim the ends of the strands, holding the scissors in your right hand, focusing on the line of your fingers.

Haircut How I cut myself part 1 .how to cut hair at home.

How beautiful to cut the bangs

Comb it in the position in which you usually wear it. To the rest of the hair you do not interfere - fix the bang barrette. Slightly wet your hair with water, comb it with a thick comb and choose a strand not 3.5-4 cm wide, holding it between the index and middle finger of your left hand. You need to grab the strand exactly (horizontally), because fingers will serve as a guide for scissors. Lightly pull the hair and with your second hand gently cut the ends of the strands. Be careful with bang length. Remember that wet hair is usually about 1 cm longer than dry hair.

At home, it is possible to perform a simple haircut, where all the strands will be the same length. Determine for yourself the length of your future hairstyle. If earlier you didn’t have to cut your own hair, and you have no experience in this matter, it is better to measure the length of the strands with a ruler.

To trim my husband at home with a typewriter video. Who is suitable haircut "box

Act gradually, choosing strands first on one part of the head, then move on. If the haircut is male, you can do it with a machine - so faster and more reliably.

If you have curly hair, be careful - even straight hair looks longer when wet. On curly hair, this effect is stronger. So do not shear too much, so that later your hairstyle is not shorter than we would like. The girl can advise another original and not very complicated way to cut at home. You need to carefully comb clean wet curls, tilting his head down. In this position, you need to cut the hair smoothly, one at a time, to your chosen length.